Space heaters are valuable for the winter season, but they are necessary for some areas where the cold is sometimes unbearable. There are many types of space heaters based on power as well as based on heating methods. The space heater disintegrates into two types that vary from elected to fuel heaters. Both the heaters are for the same purpose and are made to heat the room, but they work on different principles. Due to heat generation and excess use, especially in the winter season, heaters can malfunction or completely break down. Well, this can be done to any heater whether it is reliable as well. There can be various causes of malfunctioning of space heaters in defects of any components, and the defects may be major or minor.
So next time your space heater fails to do its job correctly, do not just replace it but grab your toolbox and do some engineering in your space heater. Thus, with these methods, you can easily save your time and of course your money.
Fixing The Space Heater
The fixing of any appliance includes the steps of disassembling, diagnosis, repairing or replacing, reassembling, and trial run. In the same way, first, you have to:
Disassemble The Heater
To fix your space heater, first, you have to open its main case. Opening the case is not difficult, but you must take some precautions. First, you will need:
- PPE’s (rubber gloves and goggles)
- Screwdriver set
- Adjustable plier
- Fixed and preferably long nose plier
Safety equipment is most important, especially in electrical and fuel-based appliances. When opening your space heater, ensure that all the screws and nut/bolt are preserved in some bowl or another container so they are not misplaced.
Diagnose The Problem
“Identify the problem, as it is the first step in solving if there is one.” Diagnosing the problem is not as difficult as most people think, but you can guess the problem by yourself just focusing on some things.
These are the common problems of the space heaters and their possible reasons. So, finally, now your problem has been identified and the next step towards betterment is to clear it.
Solving The Problem
To solve the problem after the problem is identified is to decide whether to fix the defective part or replace it. Setting small and inexpensive components such as wire, power switch, nuts/bolts is not just a waste of time, but they have high chances of failure again. These are the solutions to the above-discussed problems.
If the power issue is caused by external wiring, tape the malfunctioned part or replace the wiring, and your heater is good to go. Moreover, if your malfunction button causes a problem then it advised you to change it. These switches are readily available at any hardware shop; all you have to do is show them your faulty switch so they can give you the same piece. One thing that should be taken care, is that the switch must be of the same current and voltage rating as the previous one.
If there are internal wiring problems, you can replace or fix those wiring based on the affected area they have. If the area of wear and tear is small, it can be fixed, but if the area is large, the best solution is to replace them.
Keep Turning Off
If your space heater keeps turning off, it may be due to the above-discussed reasons. If the shutting off is due to heater overheating, you must first clean all components and instruments in the heater. If it is because of the timer malfunction, replace it because it is just too complex to fix at home. If it is due to a weak power supply, you must change the location of the space heater or fix the power outlet.
Temperature regulation means the heater is not working at your desired temperature. If this problem is due to the thermostat accessing the thermostat, you will see two or more wires attached in some five terminals. To disassemble the thermostat, first, take a photo of cables to make sure that you connect them in the correct place afterward. Now you can replace or fix the thermostat, but replacing them is better. Make sure that you install the same thermostat as a replacement. If the problem is a control malfunction like a control knob or remote control, they can fix it quickly. All you have to do is check these and replace them if necessary. The last clause of the temperature regulation problem is the dirt inside the heater, which can clean easily.
Noise problems can be due to e parts which can tighten quickly. The degraded part can be replaced but make sure that the new features are appropriately drawn because the moving parts require some extra care in installation. If the noise problem is due to metal wear and tear, the best way is to fix this equipment with genuine items.
Reassembling Of Space Heater
After the problem is fixed, the next step is to reassemble the heater. While doing this task, ensure that all the components are in their appropriate position and properly tightened. Ensure that all the wirings are in their proper place and the interior is cleaned and safe. Now place the cover in the position and tighten the screws. If you have different configuration screws, ensure that you tighten them in their correct position.
Trial Run Of Heater
Before attempting a trial run:
- Make sure that no flammable object is near the heater, and also send your kids and pets outside of the room where you are doing a trial run.
- Ensure that the room has proper ventilation and, if possible, keep the fire extinguisher near you.
- Open the switch with extreme caution. If you detect any issues in working or any unexpected sound, immediately turn off the heater, but if the heater is running smoothly, the alert has not been cleared yet.
- Run the heater for some time in front of you with caution.
- Run all the options to check their proper working and check the heater’s working at extreme conditions if it works appropriately.
Congratulations! You have done it.
Fixing your heater is not a difficult task, and you can do it with some assistance and tutorials. Repairing your appliances by yourself not only saves you time and money but also gives you a sense of accomplishment. You can fix your space heaters in manageable steps by following the above procedure.
Frequently Asked Questions
Why Is The Space Heater Not Turning On?
The most common issue in the space heater is the failure to turn on. This can be due to a power cord, power switch, or internal wiring malfunction, and these can be easily replaced.
How Much Cost To Fix A Broken Heater?
It costs almost nothing when fixing a space heater; when replacing a component, you have to pay for that instead of a whole space heater, so fixing the broken heater is not a bad idea.