Propane wall heaters are a great supplemental heating source for spaces that are already insulated and climate-controlled. The biggest advantage of propane heaters is that they can be quickly turned on and off, which makes them a perfect choice for supplementing heating in a room or area where people will be spending short periods of time. In this complete guide, we will show you how to light your propane heater in just a few simple steps.
Step by step process of lighting a propane wall heater
The first thing you will need to do is open the propane tank. Most tanks have a lever located on the top that can be turned to the right in order to release the gas. Once the gas has been released, wait a few minutes for the tank to fill up with air.
Next, locate the “on/off” switch on the propane wall heater. It is usually located near the base of the unit and will have an “I” or “O” written next to it. Push the switch in the “on” position, and you will see a small light above the switch turn on.
Now, locate the igniter button on the propane heater. It is a small, silver button located near the top of the unit. Push and hold the igniter button for a few seconds until you see a spark. Once the spark has been lit, release the button and quickly light the end of the propane heater with a match or lighter.
Once the propane has been lit, you can adjust the heat by turning the knob on the front of the unit. The further you turn the knob, the higher the heat will be. You will want to keep an eye on the flame as you adjust the heat. If the flame gets too high or too low, you can use the knobs on the side of the unit to adjust it.
That’s it! You have now successfully lit your propane wall heater. Enjoy the warm, toasty heat.
Safety precautions when lighting a propane wall heater
While propane wall heaters are a great source of supplemental heat, it is important to take a few safety precautions when using them.
1 . Always make sure the area around the propane wall heater is clear of flammable objects before turning on the unit.
2. Never leave a lit propane wall heater unattended.
3. Keep children and pets away from the heater at all times.
4. If the flame gets too high or too low, use the knobs on the side of the unit to adjust it.
5. Make sure the propane tank is in an upright position and is not leaking before lighting the heater.
6. If you smell gas, turn off the heater and leave the area immediately. Contact a licensed technician to fix the problem.
7. Do not use an extension cord with a propane wall heater.
8. Keep the propane tank as far away from the heater as possible.
9. If the unit starts making strange noises, turn it off and contact a licensed technician.
With these safety precautions in mind, you can enjoy your propane wall heater safely and comfortably.
Conclusion
Thank you for reading our complete guide on how to light a propane wall heater. We hope you found it helpful. Remember to always take safety precautions when using a propane wall heater, and enjoy the warm, toasty heat!
Frequently Asked Questions
How do you start a propane wall heater?
The process of lighting a propane wall heater is actually quite simple. First, find the knob on the front of the unit that controls the flame. There are usually three settings: low, medium, and high. Turn the knob to the desired setting.
Next, locate the striker on the top of the unit. This is a small metal piece that you will use to light the flame. Strike the striker against the flint wheel on the side of the unit. Be sure to hold the striker at a 45-degree angle when striking it against the wheel.
The flame should now be lit. If not, adjust the knob until you get a flame. You can then adjust the flame height by turning the knob on the front of the unit.
Why is my propane heater not igniting?
There are several reasons why your propane heater may not be igniting. One common issue is that the striker is not being struck at a 45-degree angle. Be sure to hold the striker at a 45-degree angle when striking it against the wheel.
Another reason the heater may not be igniting is that there is no propane gas in the tank. Make sure the tank is properly connected to the heater and has enough fuel.
How do you light a wall heater with an igniter?
The igniter is a small, pen-like device that you use to light the pilot light on your propane wall heater. To light the heater, first, make sure that the power is off to the unit. Then, remove the cover of the heater and locate the igniter. Hold the igniter up to the pilot light and depress the trigger. The pilot light should ignite and stay lit. If it doesn’t, wait a few minutes and try again.
Once the pilot light is lit, you can replace the cover of the heater and turn on the power. The heater will start producing heat immediately.
![Heat Trap vs Check Valve [Multi-Featured Comparisons]](https://bestheaterguide.com/wp-content/uploads/2023/02/heat-trap-vs-check-valve-450x270.webp)
![Does A Tankless Water Heater Need A GFCI Breaker? [Answered]](https://bestheaterguide.com/wp-content/uploads/2023/02/does-a-tankless-water-heater-need-a-gfci-breaker-450x270.webp)
![Taco Zone Valve Stuck Open [Reasons and Solutions!]](https://bestheaterguide.com/wp-content/uploads/2023/02/taco-zone-valve-stuck-open-450x270.webp)
![Propane Heater Smells Like Kerosene [Everything You Need to Know!]](https://bestheaterguide.com/wp-content/uploads/2023/02/propane-heater-smells-like-kerosene-450x270.webp)
Leave a Reply