When the weather starts to cool down, many people reach for their wall heater to keep them warm. If you have a gas-powered wall heater, then it’s important to know how to light it correctly. Improper lighting can lead to dangerous situations, and in some cases, even an explosion. In this post, we will walk you through the process of lighting your wall-mounted gas heater, so that you can stay warm and comfortable all winter long.
Step by Step process of lighting a gas wall heater
The process of lighting a gas wall heater is fairly simple, but it’s important to take your time and follow the steps carefully. Here is a step-by-step guide to lighting your gas heater:
1. Check the gas pressure. Make sure that the knob on the tank is turned all the way to the “on” position. If there is no gas pressure, turn on the main valve to the house.
2. Open the heater’s access door.
3. Locate the pilot light. It will be a small, blue flame located near the burner.
4. Use a match or lighter to ignite the pilot light.
5. Close the access door, and then turn up the knob on the tank until you hear the gas flowing.
6. Turn on the blower, if your heater has one.
7. Set the thermostat to your desired temperature.
8. Enjoy the warm air!
That’s it! You have now successfully lit your gas-powered wall heater. Be sure to follow these steps every time you light the heater, in order to stay safe and warm all winter long.
Safety precautions when lighting a wall mounted gas heater
While lighting your gas-powered wall heater is a relatively simple process, there are a few safety precautions that you should always keep in mind. Here are a few tips to help keep you safe when lighting your heater:
1. Make sure that the heater is turned off and unplugged before attempting to light it.
2. Make sure that the area around the heater is clear of any flammable materials.
3. Use a fireplace lighter or long match to light the heater. Do not use a regular match, as this could cause an explosion.
4. Keep a fire extinguisher nearby in case of emergency.
5. Never leave the heater unattended.
Now that you know the basics of how to light your wall-mounted gas heater, you can stay warm and comfortable all winter long. Just make sure to follow the safety precautions listed above, and you’ll be safe and sound.
Frequently Asked Questions
How do you light a wall heater with an igniter?
First, turn off the gas at the shutoff valve. Next, open the door of the heater and hold a lit match near the pilot light. The pilot light will ignite and the heater will start. If the pilot light doesn’t ignite, then you may need to clean the thermocouple.
Why is my gas wall heater not turning on?
There are several reasons why your gas wall heater may not be turning on. One possibility is that the pilot light has gone out. Another possibility is that the heater is not getting enough gas. You can check to see if the heater is getting gas by turning on the valve and seeing if the burner lights. If the burner doesn’t light, then there is a problem with the gas flow. You can troubleshoot this by checking the gas pressure and the gas lines.